Automatic Sliding Door Closer

Product Description

Automatic Door Operator Sliding Door Operator with Brush Motor automatic door with Dunker Motor ES200

Automatic Sliding Door Closer

Feature

1..Function 95% similar as Dorma ES200 Easy and works with original dorma ES200 Easy
2.Brush Motor or Dunker Motor 99.5W ,powerful enough to bear 2X160KG gates.

3.Easy install since the Drive system has been installed before leavine the factory

4.Germany Dunkermotor,CE approved

Standard Configuration

1.Minidrive Unit

2.Transformer

3.Motor

4.Decoder

5.Basic control module

6.Track

7.Carrier

8.Return Pully
9.Service cover holder
10.End stop
11.Door bracket
12.Belt connection
13.Belt tensioning device

Opetional Parts

Motion Sensor

Lock latch

Battery

Beam safety photocell

Specification

ES200 Easy

Weight of gate Single/Bi-part1X200KG/2X120KG

Width of gate Single/Bi-part900-6100MM

Master Controller32 digital microprocessor

Brush motor/Dunker motor99.5W 60VDC 2A IP50

Opening speed300-700mm/s

Closeing speed300-650mm/s

Max open strength150N

Hold Open Time/Lock0-10S/30s

Height of the rail8CM

Deepth of the rail16CM

Power SupplyAC110V-250V 50/60HZ

Temp15 C to +70 C

Power Consumptionaround 100W

Protection degree of ElectronicIP23

Function Programs

Off
Automatic
Permanent Open
Partial
Exit only

--------------------------------------------------------------------------------------------------------------------------------------------

Additional

Low noise desigh (<40db)

One million times of tests passed

Warranty: 18months

Emergency Functions

Emergency opening in case of power failure / Fail-safe
Obstacle detection with automatic return mechanism
Self monitoring light barriers
Slow speed search for obstruction

Workshop